PRODUCTS

VIS-G30

The VIS-G30 is a viscometer designed to control the viscosity of adhesive materials such as glues or gripping glues.

APPLICATIONS Rotogravure / Flexo / coupling / Reprint / Varnishes / Varnishes two-components / Glues

OVERVIEW

The VIS-G30 is a system for the regulation of the viscosity of the glues and varnishes. The measurement of the viscosity takes place thanks to a vibration sensor immersed in the liquid to be analyzed, without moving parts.
It, in series with the flow, emits a frequency that in contact with the liquid is changed, may alternatively also be installed in derivation to the ink flow.
From the analysis extrapolates the viscosity in seconds (cup ZAHN, FORD, …) and by the correction valve maintains the management based on the reference set. The cleaning of the viscometer performed at the end of work, at the same time washing the inking circuit.

APPLICATIONS

3D Application Isometric View

Detail 3D Application Isometric View

TECHNICAL DETAILS

DISPLAY PANEL AND MANAGEMENT

  • Dysplay HMI Touchscreen 4.3’’ or 9.7’’;
  • Display of viscosity through graphic elements, as well as get feedback at first glance;
  • Choosing the type of reference cup, setting the reference viscosity;

CONTROL G30-DIG

  • New generations of electronic components and high reliability;
  • The electronic component is marked II (1) G [Ex ia] IIB to be installed in the safe area;
  • Cabinet installation chosen by the client;
  • Serial communication between interface and control.

DETECTOR RIV-VIR-G30

  • The G30 can be positioned in hazardous area in series with the ink flow or shunt;
  • The G30 marking II 2G Ex ib IIB T5 Gb;
  • Solvent correction via pneumatic valve, the solenoid valve can be marked II 2G Ex ia IIB T6;
  • Varnish supply with electric or pneumatic pump;

MAINTENANCE AND CLEANING

  • No maintenance required;
  • After work by cleaning inking system also cleans the viscometer;
  • No mechanical element subject to usury.